PDA

View Full Version : replace fuel reg


'97-2.3L-ranger
02-28-2008, 08:13 PM
i need a fuel regulator to have more fuel pressure if stock is 30 psi pluse figure pound for pound with boost if 15 pounds of boost with a stock of 30 and 15 pounds of boost i think i need 45-50 pounds of fuel press what replacement fuel reg can i get. i found out mustang 98 gt will not work diff flange.

flyin
02-28-2008, 10:36 PM
Our stock pressure regulators will raise pressure with boost at a 1-1 ratio already. You shouldn't have to replace it. If you need more fuel you can do it with a tuner

Jesshwarren
02-29-2008, 09:28 AM
Stock rail PSI is 43PSI with no vac. Vac will pull it down to like 35PSI. On my stock regulator it rises 1-1 with boost.

salating
03-01-2008, 04:50 AM
unless you plan on pushing more than 18psi on a stock motor the stock one will work

i got one since i upped my boost to 23psi and i also got bigger injectors

makes it eaiser to tune when you can adjust your fuel pressure

fordnut71
03-02-2008, 05:19 PM
i got a mustang fuel regulator. its a 2 bolt from accel

'97-2.3L-ranger
03-04-2008, 06:37 PM
you say the regulator is controlled by the vac lines so more boost equals more fuel press. so what your saying is if the regular fuel press is x (stock peak fuel press) it will produce 15 more pounds over x at 14.7 psi of boost it will be capable of producing pound for pound over normal 1 pound of boost equals 1 more pound of fuel press 2 pounds of boost will make the regulator push 2 more over than the norm and so on and so on? but it will not push 18 pounds over x (stock peak fuel press)

Thanks for the information you saved me an unnecessary 75 bucks