no start! HELP!

[freebyrd24]

well I just buttoned everything up and the vehicle cranks but will not turn over. I am getting a p0232 code. I am getting fuel at the fuel rail, but NO voltage at the injector plug. Any ideas? Need help ASAP trying to start tonite

[Jesshwarren]

P0232 = Fuel Pump Secondary Circuit High

What injectors are you running? Make sure you stay away from the old brown tops they will fry the injector drive because they are low-z injectors.

You running High-z (high impedance) injectors?

[freebyrd24]

Yup I am running the 38# injectors. Blue top High impedence. Now the code has shut off and not returned. The truck still cranks but will not even cough or do anything. There is voltage coming out of the ECU to the injector. I tested the white injector wire. it had voltage while cranking. Also I pulled a spark plug to check and there is no spark. I have no idea what is going on

[Jesshwarren]

Ok I know who you are :)

Make sure the crank sensor is plugged in. Other than that I'm note sure why it would not have spark.

[freebyrd24]

Hahaha I wasn't sure if you knew! Haha thank you. Where is the crank position sensor located? I have one misc. plug that has not found a home yet. So that may be it

[freebyrd24]

IT LIVES! Thanks Jess! That sensor cuts both fuel and spark off!

[Jesshwarren]

I was pretty sure that was your problem :=) It's an easy sensor to miss.