Parting out 2.3/5spd Drivetrain!! Not Listed?! Pm Me!!

[dklimek]

I have decided to part the drive train out since I haven't had much interest in the car. Everything is off of my 1984 Turbo Coupe.

Here is everything I am selling off of it
I have searched alot of prices and this is what seemed fair but...

EVERYTHING IS NEGOTIABLE SOMEWHAT:

-Big Vam, never been opened!-$50 Shipped
-Svo compressor housing, great shape!-$65 shipped
-New FORD Motorcraft COMPLETE distributor (tfi/cap/rotor,etc) with around 300 miles on it-$85 shipped
-Complete t5 with bellhousing/cross member-$250+shipping/$275+ shipping with below Hurst shifter
-Hurst shifter/aftermarket "cobra" shift knob-$45 shipped
-Another complete t5 that needs roll pins replaced, no first gear, will seperate bellhousing/tranny.
-Inline upper/lower/throttle body with all working sensors, and egr block off plate installed-$100 shipped
-Oil pan-$30 shipped
-"Fuel Injected TURBO" Valve Cover-$40 shipped
-Box style ported lower manifold-$115 shipped
-Box style gutted and rotated 90* upper manifold, needs to be smoothed-$65 shipped
-t3 outlet tube to throttle body rubber hose-$5

My $15 List (this list is PLUS shipping)
-Alternator & brackets with 300 miles
-Power steering & brackets
-Stock cam gear ($15 shipped)
-Stock water pump & hardware
-v belt crank pulley
-IAC Valve
-Big vam inlet tube

All in all EVERYTHING drivetrain related is coming out of the car, so if you need any sensors/ pigtails/wiring/parts let me know as the motor/tranny is all there. Pm me if you need anything else and when I get some more time I will add more things.

email: dklimek86@yahoo.com as they go directly to my phone or pm me.
Paypal is dklimek86@yahoo.com, please do not forget the fees!

I will do discounts for package deals!
There is more I'm sure but as of right now..
This list is UPDATED as of 2/15/10 7:36pm

[Satan's Snake]

you wouldn't happen to have to master cylinder to slave cylinder hose and fittings would you?

[AJ_Fritz]

please put your location in your user control panel. very nice forsale post otherwise :)

[krisrick444]

is the hurst for a t-5? and if so do you have pics?

[DangerRanger01]

Can you post a picture of the Hurst shifter/aftermarket "cobra" shift knob-$45 shipped
please?

[dklimek]

I'll take a picture of the shifter tomorrow and yes it is for a t5. Satan, I have a cable clutch man, you are looking for the 86-88 hydrolic turbo coupe setups, sorry man!

I am located in Wilminton, NC...sorry but I can't find out where to change that!

[dklimek]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=390091323693&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=9f6af34e1220a04373c35073ffc4e829&rvr_id=&ua=M*S%3F&itemid=390091323693

Here is a pic of the exact shifter but it has a cobra snake knob

[dklimek]

EDITED LIST! 2/20/10

-New FORD Motorcraft COMPLETE distributor (tfi/cap/rotor,etc) with around 300 miles on it-$85 shipped
-Complete t5 with bellhousing/cross member-$250+shipping/$275+ shipping with below Hurst shifter *Pending*
-Hurst shifter/aftermarket "cobra" shift knob-$45 shipped *Pending*
-Another complete t5 that needs roll pins replaced, no first gear, will seperate bellhousing/tranny. $50+shipping
-Inline upper/lower/throttle body with all working sensors, and egr block off plate installed-$100 shipped obo
-Oil pan-$30 shipped
-"Fuel Injected TURBO" Valve Cover-$40 shipped
-Box style ported lower manifold-$115 shipped
-Box style gutted and rotated 90* upper manifold, needs to be smoothed-$65 shipped
-t3 outlet tube to throttle body rubber hose-$5

My $15 List (this list is PLUS shipping)
-Alternator & brackets with 300 miles
-Power steering & brackets
-Stock cam gear ($15 shipped)
-Stock water pump & hardware
-v belt crank pulley
-IAC Valve
-Big vam inlet tube

[Skyy_4life]

please pm me pictures of the inline and rotated manifolds. might be taking one of these.

[dklimek]

http://hphotos-snc1.fbcdn.net/hs230.snc1/7733_164980929433_623929433_3560315_3000155_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7124_164981474433_623929433_3560320_7725445_n.jpg
http://hphotos-snc1.fbcdn.net/hs224.snc1/7124_164978849433_623929433_3560228_6789335_n.jpg
http://hphotos-snc1.fbcdn.net/hs230.snc1/7733_164980929433_623929433_3560315_3000155_n.jpg

Here are the pictures I have of the box style upper and lower manifolds. I will get the inline manifold pictures tomorrow.

[Riddle_Rob]

Just wondering if you got my pm. Thanks.

[mustang/TC swap]

dklimek just seeing if you had any ECM to Engine under the hood harness from the turbo coupe it would help me out alot. thanks

[dklimek]

dklimek just seeing if you had any ECM to Engine under the hood harness from the turbo coupe it would help me out alot. thanks

Just removed it today! Shoot me an email at dklimek86@yahoo.com and we can talk prices.