M5OD shifter plate (top cover) needed.. Trade?

[Cutlass327]

Any of you who have broken transmissions have a good top cover? I had to get a whole trans last time (JYs won't sell the top cover itself... grrr), and I just need the shifter cover. The alignment pins on mine have fallen out, and there is no way to buy replacement pins - you buy the pins for big $$ and get the rest of the cover for free.

If you have broken gears, seized bearings, etc, and are getting another trans, let me know. I'll pay shipping. If you need the old one for mine to take with yours for the core, I'll send it to you when I get yours.

PM me and I'll get back asap. I'm not always on here much, but I'll be stopping in for a while hoping to find a response.

Thanks

[FordRacingZX3]

Are you just talking about that thin plate that sits at the bottom of the shifter and is held in by 3 torx bits?

[Cutlass327]

Sorry, shoulda described better. Actually I need the shift rail part.

http://www.supermotors.org/getfile/265755/original/M5ODR2exploded.jpg

Looks like it is Number 47, in the top right corner

[Cutlass327]

Well, I was able to fix it. The pins had been retained by the top seal plate. I tapped them back into place and then just bent the plate down to hold them onto place after having to re-install them again the 2nd day. I had even staked them in with a punch..