Fuel PSI regulator wide selection

[Thedrifter]

one of the next thing i plan to replace on my truck is the fuel psi regulator i was on www.oreillyauto.com and i took note of something the partnumber for a 97 ford ranger fuel rail CM-4760 or F4SE-9C968-AA is the same for the 97 ford mustang cobra :hehe: so im considering a fuel rail mount adjustable regulator just some food for thought, i never noticed this but i never really asked were/if anyone got there fuel psi regulators, i know our stock ones are just fine and cheaper but if you find a good used aeromotive regulator #13103 and they mount fuel psi gauges too, anyways just food for thought:peelout:

[fordnut71]

i have a accel fpr iv been using sence i bought my truck. i have a 1"autometer pressure gage where the schader valve use to be on the rail.i got the adapter from upr many many moons ago.

[BogusSVO]

I have a Kirban AFPR on all my turbo fords... new they are about $70, billit alum cases

yours is the 2 bolt set up, Kirban has those too.

I have been using the same one now for about 8 years or so.

[96lowslow]

I have a BBK fpr and it has a threaded port on the side for a gauge, im running the bbk gauge also. I bought them both on ebay cheap

[jfive]

what about something like this. http://www.foreprecisionworks.com/fuel-pressure-regulator.html?gclid=CIO35fTWoKMCFRB1gwoduh_Gng

[BogusSVO]

well if you need that level or just want to spend extra cash...

the 3 bolt style $75
http://www.jdsperformance.com/index.asp?initemuid=147&fcmd=item&inmake=0

and here is the 2 bolt style $89
http://www.jdsperformance.com/index.asp?initemuid=77&fcmd=item&inmake=0

I know the 3 bolt will bolt right on the factory fuel rail