Tube question

[Krazyrngr]

ok this isnt my motor (its actually Tims98 from RPS) but got a question the coupler that goes from my tb to my turbo seems to be about 2 inches too long it covers that lil plug thing. Is it because the merks used a different size TB or turbo inlet tube thing? I have an extra IC tube thing that looks like it would fit better I may try and use that instead but was just curious

http://memimage.cardomain.com/member_images/12/web/1644000-1644999/1644169_38_full.jpg

Also anyone know where I could find some good pics of how the oil lines runa nd come off the turbo and where they go? I think Ill need to have a couple made, not sure if I have them all

And one last question what downpipe are you guys using?

[nagelandy55]

Stock dp will work good for a stock location header and a T3, unless you wanna go bigger then you'll have to fab something up yourself.

As for the Oil lines, here are some pics of my setup.

http://i209.photobucket.com/albums/bb308/nagelandy55/parts/MotorBuildRemoval143.jpg
http://i209.photobucket.com/albums/bb308/nagelandy55/parts/MotorBuildRemoval157.jpg

[Krazyrngr]

Just curious that metal line with tape on it, what is it attacked to on the intake side?

[salating]

That would be the oil pressure sending unit on top of that connector. It connects into the oil passage.

[AJ_Fritz]

its turbo specific. has a 3/16 tubing flare coming out of the bottom.