PDA

View Full Version : gaskets

'97-2.3L-ranger
08-09-2008, 07:30 AM
i've got to get a hole gasket kit top & bottom intake oilpan valve cover throttle body and head gasket. has any one seen the whole kit. every other car/truck has a kit with everything.

look at this gasket for 12.00 cheaper than sumittracing.... thats like free shipping and then some.

http://www.speedunleashed.com/FelPro_Gaskets_1035_FORD_23L_HEAD_GASKET-p-20179.html
D94R
08-09-2008, 08:37 AM
I always buy the entire gasket/seal rebuild kits from Advanced Auto, Checkers, or Autozone. Usually about $130.
Krazyrngr
08-09-2008, 10:28 PM
go to needhp.com they have it for the cheepest it was like $65 shipped

*edited* well crap now they have 2 options wish I would have seen that other kit before
heres the link
http://www.needhp.com/index.php?main_page=index&cPath=33_35_63&zenid=79cb0d63a812db882add7f98677e76ce
AJ_Fritz
08-10-2008, 07:45 AM
there are a couple of different gaskets out there. you want the felpro 1035 head gasket and the one peice rubber valve cover gasket and depending on which oil pan your using the one peice rubber gasket for there to. all gasket sets are not the same. when in doubt call the seller and ask them what gaskets are in the kit. the 1035 will be anywhere from $40-$60 all by itself so look at the more expensive kits.
bruiser
08-10-2008, 12:02 PM
i got the 1035 from racer walsh for 44 i think cheapest i found it
Riddle_Rob
03-13-2009, 01:37 AM
Sorry for bringing this back up but LOL

On the NEEDHP site..
http://www.needhp.com/index.php?main_page=index&cPath=33_35_63&zenid=79cb0d63a812db882add7f98677e76ce

I want the turbo gasket set no? It should work on the 95-97 ranger block correct?
radrangerXLT
03-13-2009, 09:54 AM
Sorry for bringing this back up but LOL

On the NEEDHP site..
http://www.needhp.com/index.php?main_page=index&cPath=33_35_63&zenid=79cb0d63a812db882add7f98677e76ce

I want the turbo gasket set no? It should work on the 95-97 ranger block correct?



Some of the gaskets in the "turbo" kit may work and some may not, it's specifically designed for the 80's engines. Adam is right, the "turbo" kit has a different oil pan gasket and most likely a cork valve cover gasket. You want the "ranger" rebuild kit for a 95+.