PDA

View Full Version : Holset Turbo / Turbo Rebuild

Riddle_Rob
09-26-2008, 05:20 PM
Ok.

I THINK I found a turbo. It's from a 91 Cummins Diesel. That's all of the info I have for now but I did some googlin' and came up that it was an H1C. Am I correct?

The seller says it came from his truck and saved the turbo from his engine when he swapped for a new one. Not sure why he swapped, not sure if turbo has play all I know is he wants $25CAN for it which is retarded cheap.


SO if I go get this turbo, I'm going to want to rebuild it even though he said it was working 100% when it came off.
How hard is it to rebuild? Where can I get kits? I don't have a credit card only paypal.

I was reading up on one of Jess' videos on youtube saying he used the same turbo haha so was hoping for some quick feedback. It's too good of a deal to pass up, but I have to drive 2 hours to get it. HELP!
Riddle_Rob
09-26-2008, 05:26 PM
ALSO would I need one of them funky spacers to make it work with the header I bought from here?
nagelandy55
09-26-2008, 05:51 PM
likely hot
Riddle_Rob
09-26-2008, 05:54 PM
Does it matter? I didn't do the crime :p
fordnut71
09-26-2008, 06:59 PM
if you get out to mississauga theres a place called dals turbo an injector rebuilders. its just west of the airport,in the dixie an midway area.
Riddle_Rob
09-26-2008, 09:16 PM
Mmmm'kay.

I'm just waiting for the guy to reply. I'm 99% sure at that price it's gone.
AJ_Fritz
09-27-2008, 01:12 PM
the h1c are good but they surge on a stock head right jess? dam my memory sucks or jess just changes his sh!t way to much.

ive run hy35 and hx35 and i am bout to run an hx40. i have yet to see an surge from these. the h1c were an older design without the ainti-surge ring.
Riddle_Rob
09-27-2008, 04:01 PM
Well, he got back to me today. I'm going to go pick it up tomorrow :D YAY!
AJ_Fritz
09-27-2008, 08:14 PM
now they make 2 different H1c's one has the anti-surge ring and the other one lookes like a garret t04 compressor housing
Riddle_Rob
09-27-2008, 09:39 PM
Guess I'll find out when I get it tomorrow. I'll post pics.
nagelandy55
09-28-2008, 07:25 AM
Right on
Riddle_Rob
10-21-2008, 06:15 PM
Well I got the turbo finally.

Turns out my research failed.
All of the info the guy could give me was it was off a 91 Cummins engine. Didn't say which one or anything. Went with the common one and came up with H1C. Figured it'd be perfect.

Here's what I got haha... I can't even tell what it is because it's ID tag is missing, most likely rotted off. I peeled off a lot of rust already to clean it up. There is the most miniscule bit of play I might even be imagining it. I know it's best to rebuild but I can't even use it, it's a T4 flange. Anyone interested in it?

http://i44.photobucket.com/albums/f46/Riddle_Rob/83cb4dc0.jpg
http://i44.photobucket.com/albums/f46/Riddle_Rob/4c39adf3.jpg
http://i44.photobucket.com/albums/f46/Riddle_Rob/cb2211f6.jpg
http://i44.photobucket.com/albums/f46/Riddle_Rob/629351e0.jpg
taknotes
10-21-2008, 08:36 PM
if interested, i have a HY35 that needs to be rebuilt for sale
fordnut71
10-21-2008, 08:43 PM
ill give ya $25 for it
nagelandy55
10-21-2008, 09:36 PM
Holy smokes that looks like it came out of a tiger tank from the 40's lol
Top Notch
10-21-2008, 09:55 PM
Would you be able to put a smaller exhaust side on it?
Riddle_Rob
10-21-2008, 11:22 PM
ill give ya $25 for it

Heh. Shoulda just passed you the guys phone number I got it from scarborough today.

If you want to come get it or paypal me the money + shipping money sure. I'll take the $25 back haha.

I'm not sure about modding it atm as I don't even know if it will come apart without breaking bolts. There's a broken bolt in the oil drain already. The rest don't look like they will give up easy without snapping like the vband clamp bolt I took off today.

It would be cool to put a smaller exhaust housing on but you know.. I'm still noob.
fordnut71
10-21-2008, 11:29 PM
ya ill come get it. pm me your addy
Jesshwarren
10-22-2008, 09:31 AM
You can put a smaller exhaust housing on it no problem. The big problem I see is it has the small compressor.

Here is what a good H1C looks like. This is off a 92-93 dodge cummins
http://cgi.ebay.com/ebaymotors/1-h1c-turbo-hot-rod-race-diesel-holset-drag-sbc-bbc_W0QQcmdZViewItemQQ_trkparmsZ72Q3a543Q7c39Q3a1Q 7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2ec 0Q2em14QQhashZitem150304893558QQitemZ150304893558

Good deal on HX35
http://cgi.ebay.com/ebaymotors/USED-HOLSET-HX-35-DODGE-CUMMINS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a543Q7c39Q 3a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286 Q2ec0Q2em14QQhashZitem160292667462QQitemZ160292667 462