Turbo Headers are now available!!

[Jesshwarren]

Note I do not have any intercoolers available at the time. they wher lost in shipping. :(
Best price?s

This is the same header I run and have been running for the last 2 years. It allows you to run a turbo and keep you?re A/C.

What is different about our headers? http://rangersrevenge.com/products/header%20mods/index.html

$189.00 Shipping & handling $20


http://rangersrevenge.com/products/DSC00951.JPG


Down Pipe Kit
http://rangersrevenge.com/products/DSC00956.JPG
Down Pipe Kit, includes V-band clamp. $49.00 <FORM name=submit action="<a href=" target=_blank webscr? cgi-bin href="http://www.paypal.com" border="0" src="https://www.paypal.com/en_US/i/btn/btn_buynow_SM.gif" alt="Make payments with PayPal - it's fast, free and secure!" type="image" <INPUT>

Down pipe only. 25$
Vband kit only. 25$

<A href="http://www.rangersrevenge.com/main_002.htm">http://www.rangersrevenge.com/main_002.htm</FORM>

[SHONUF816]

does the turbo compressor housing contact the #1 exhaust pipe tubing in any kind of way? i have had some stainless headers that seem to be either welded incorrectly or welded wrong all together.

[Jesshwarren]

With a standard turbo there are no problems. If any one wants to run a Holset ask for the spacer kit. I run the Holset H1C and have encountered no problems. I even had an HX-40 on there for a while.
I make sure all these headers are up to par http://rangersrevenge.com/products/header%20mods/index.html (http://rangersrevenge.com/products/header%20mods/index.html)

[twiztid1]

I'm diggin the new site!! As soon as the funds are available, I will be ordering the header and downpipe w/ 2-O2 bungs.:) :)

[Jesshwarren]

Thanx, You have a sweet ride.

I will have some more products in about 6mo. Intercoolers, Waste gates ect...

[twiztid1]

Thanks, Your truck looks good also, just needs to be a little lower(LOL). I will definitely order more from you if you're getting more items.

[wes761]

How much for the spacer kit, and how does the spacer kit work? Does it go between the head and header, or between the header and turbo?

[ben_2_go]

Hey Jess,while you're here, would you post all the turbos that will fit the header.Let us know if they need the spacer kit,too.Thanks.

[Jesshwarren]

Most every t3 footprint turbo will fit. The only turbo that needs a spacer is the holsets. Any one want to run a holset just inform me I'll set it up for you.

The reason a holset needs a spacer is because of the large compressor housing it interferes with the front runner on the header.

I have always ran a spacer on mine with the holsets. There was never any need to use a spacer with any other turbo?s, and I?ve ran a bunch of different turbo?s.

[Riddle_Rob]

I ordered mine up !! I gotta grab a IHI adapter from somewhere though..for now at least.

[Jesshwarren]

I ordered mine up !! I gotta grab a IHI adapter from somewhere though..for now at least.

What do you need a IHI adapter for? A IHI should fit with no problem.

Yea I sent it out Monday, I was surprised how much it costs to send one over the Lake :wink5:

[ben_2_go]

Thanks.

:thanks:

[Riddle_Rob]

Well, isnt the flange on the header for a T3? IHI has a different footprint. At least the one I have.

[wes761]

Well, isnt the flange on the header for a T3? IHI has a different footprint. At least the one I have.

Turbo Coupe IHI's use the same footprint as a T3.

Jess, I was wondering what you suggest for running the EGR through the wastegate flange?

[Jesshwarren]

Turbo Coupe IHI's use the same footprint as a T3.

Jess, I was wondering what you suggest for running the EGR through the wastegate flange?


That would be hard. If it was me I would run it out of the down pipe. You need EGR?

[wes761]

That would be hard. If it was me I would run it out of the down pipe. You need EGR?

:smile: I suppose not, but I'm running an internal wategate so I will still need to make block off plate for the header wastegate flange.

[nagelandy55]

Don't run the EGR if you don't have to, its just another PITA to worry about.

[wes761]

I know, time do do the ol' nickel trick.

[ben_2_go]

Nicklel trick?

[Riddle_Rob]

Just received my turbo header today :) Came yesterday but I didn't have proper cash to give the guy for customs. Somehow I STILL got customs on my gift :( Was only $11 tho. Didn't feel like givin a $9 tip yesterday so I waited until today to go pick it up.
Lemme tell ya, it's MINT haha. Lovin' it.

And my IHI is off of a MX-6 so it's a smaller footprint. It's square. It's also for sale now :p

[Jesshwarren]

Just to let you know. It's a good idea to run a flex joint at the bottom of your down pipe. With a solid exhaust it's a good way to crack a header. Something has got to give with motor twist under hard acceleration .

I have always ran a flex joint on mine.

[Riddle_Rob]

Never thought about that, but it is a solid point. Thanks for tip man.

[wes761]

Never thought about that, but it is a solid point. Thanks for tip man.

No, its not a solid point. :hehe: sorry for the pun

[Riddle_Rob]

By chance...who manufactures these?

[ben_2_go]

I believe Jess used to and now a company does for him.I'm still unclear on that.

[Jesshwarren]

By chance...who manufactures these?

Ask Stinger ;) jk, I’ll tell you. They are made in China. They where designed in the U.S. and the blueprints where sold to China from what I know. Now they are manufactured in China.

[ben_2_go]

I was wrong again.Either way they still seem to be of good quality.

[Riddle_Rob]

Yea but do they have a company name?

[ben_2_go]

Ching Chang Chong Industries :hehe: I'm such an azz.

[wes761]

I mounted mine last weekend and had to drill out of three of the bolt holes on the flange that mounts to the head. It was so close to fitting, but I didn't want to risk stripping the head. You can't expect every head to be exactly the same. Just a heads up if anyone else has problems getting the bolts started.

[flyin]

mine was the same way i started started most of the bolts with the head very loose then tightened them each a little at a time. It was very tight.

Try using a ball end 8mm allen wrench or hex socket. It helped quite a bit.

[Jesshwarren]

Like Flyin said!!

All bolts must be started before any are tightened. It's a close fit.

[Jesshwarren]

This is how I mount my turbo. It's quick.

http://rangersrevenge.com/2.3l%20build%20up/day5/DSC01190.JPG

[wes761]

Here's a few pics of my quick mock up. Notice, no need for a spacer if you run a HE351.

http://memimage.cardomain.net/member_images/3/web/2175000-2175999/2175438_43_full.jpg

http://memimage.cardomain.net/member_images/3/web/2175000-2175999/2175438_44_full.jpg

http://memimage.cardomain.net/member_images/3/web/2175000-2175999/2175438_46_full.jpg

[D94R]

Wes, any word on the elbow or flange?

[wes761]

Yesterday he said that he has 4 of them finished and is just waiting on the v-band clamps to come in.... unfortunately they are tapered down to 3".... He said he will take special orders for 4" ers..... I've been patiently waiting :banghead:

[taknotes]

Jess..ordered a header tonight, included instructions that it will be used with holset..just wanted to make sure you got that..

Thanks,
Ryan

[wes761]

Wes, any word on the elbow or flange?

Ok... I think Shannon is ready. He is also a NATO member if you would like to contact him there, if not I can put an order in for you. He is making me a 4" flange, and could do the same for you I'm sure. :yesnod:

Sorry for hijacking this thread jess.

[twiztid1]

I received my header today. Thanks, Jess.:rockwoot: :thanks:

[taknotes]

I think i did too jess, havent been how there to check, Thank you for your business

[Speedrcr]

Jess - just ordered a header from ya, or should I say my wife did...:hehe:
Looking forward to seeing it ...

Steve

[Jesshwarren]

Jess - just ordered a header from ya, or should I say my wife did...:hehe:
Looking forward to seeing it ...

Steve

It will ship Monday :thanks:

[D94R]

Ok... I think Shannon is ready. He is also a NATO member if you would like to contact him there, if not I can put an order in for you. He is making me a 4" flange, and could do the same for you I'm sure. :yesnod:

Sorry for hijacking this thread jess.

Wes, I'll PM yah.

[Sevensecondsuv]

Just ordered a header from you Jess. Looking forward to seeing it!

[Speedrcr]

Received my header today - looks great!

Thanks

[Sevensecondsuv]

Got mine on thursday. Looks great!

[twiztid1]

Received my downpipe today:peelout: Thanks, Jess.

[crono61]

Im definitely interested in buying a header...is there any ETA for new stock? On the main site it says they are sold out.

[Top Notch]

Talked to Jess. He said he'll have them in stock in about 4 to 6 weeks.

[bruiser]

4 to 6 weeks!!!! nooooooooo now i got use the puny e6 mani i have =[

[bruiser]

so whens the next shipment jess?????

[muddpawz]

jess, with no fab experience, whats the best way to run the bov outlet, off your header, back into the exhaust pipe? is there any way to do it by bolting (pita, leaky) or would i have to take it somewhere and have it fabbed after i get it installed? AJ has a perfect example of a side shot pic as his personal id pcture on this site. any thoughts?

[Jesshwarren]

jess, with no fab experience, whats the best way to run the bov outlet, off your header, back into the exhaust pipe? is there any way to do it by bolting (pita, leaky) or would i have to take it somewhere and have it fabbed after i get it installed? AJ has a perfect example of a side shot pic as his personal id pcture on this site. any thoughts?

I never got to do any of this yet. I run my WG to a open dump.

[muddpawz]

jess, would your header be considered a "paired header"? if not where would i go to get one? I know they are more effecient than a regular tube header so im trying to find one and compare them. Thanks for all the help to everyone!!

[Jesshwarren]

jess, would your header be considered a "paired header"? if not where would i go to get one? I know they are more effecient than a regular tube header so im trying to find one and compare them. Thanks for all the help to everyone!!

No it's not. You will probably need to get one custom made.

[muddpawz]

Do you have any of yours in stock? Im gona be ready to get one prob late next week for sure.

[birdmanslopy]

Will your header support a 40 pound turbo you think :)
i ant trying to break a land speed record but my brother in law has a hx 55 or 60 i believe, i think it would be a fun experiment :)

if it wont what is the max size you suggest on that manifold before it wants to crack or anything??

[07Ranger]

ordered one a week or so ago. whats the lead time? ive heard nothing.

[smashed96gt]

Just ordered a header and wastegate combo.

[smashed96gt]

Ok maybe not. Jess can you please let me know when you get a new shipment in?

Thanks.
Bill

[Jesshwarren]

Sorry we just ran out.

We have these in stock. Will add these and some other product to the sight this week.
http://www.turborangerforums.com/imagehosting/149a211a741d57.jpg

[smashed96gt]

Jess, any idea when you are going to have the center mount headers back in stock with the wastegates?

[birdmanslopy]

Sorry we just ran out.

We have these in stock. Will add these and some other product to the sight this week.
http://www.turborangerforums.com/imagehosting/149a211a741d57.jpg

how much those running for the same price?

[Redneck86]

+1 I too am curious, also what are the gains compared to the E6 mani?

[Oldmandan]

+1 I too am curious, also what are the gains compared to the E6 mani?

I think there's too many variables to actually pin that one down... Although someone on TF did some flow testing about a year ago with all 3 header designs. I know flow testing doesn't equal HP, but it's a good way to tell what's happening beginning to end on a header. The center tube header flowed better than the stock mount tube header in that test.

[07Ranger]

any idea on shipment of the holset header?

[07Ranger]

just got mine yesterday. looks awesome! thanks guys.

[mastersmith]

How long till the headers are back in stock?

[DangerRanger01]

How long till the headers are back in stock?


+1. I'd have already purchased one but you're out :(

[smashed96gt]

On the 18th he told me it would be 2 months or more.

[mastersmith]

well I guess ill just run the stock manifold for a while

[speedaddict]

Do you have any headers in stock? If so i want one Thanks-

[1450mazda]

When do you think you will have headers in stock again. Are there any other good alternatives out there?

[4BangenRange]

Will you still get the turbo headers for the holset again? or do you have any of those spacers left?

[speedaddict]

Yeah x2 i need a spacer

[jfive]

Jess has a stock mount header on ebay right now thats done in like 24 hrs. If anyone wants one of jess's headers that isn't a center mount. Doesn't have the external wastegate either. at 102.00 right now. He also has some waste gates too.

[gnarlycharlie4u]

just curious...
do you plan on stocking the header w/the holset's spacer? i'm considering an Hx30 or 35 but I'm not sure when I'm going to get around to doing it.

[Jesshwarren]

just curious...
do you plan on stocking the header w/the holset's spacer? i'm considering an Hx30 or 35 but I'm not sure when I'm going to get around to doing it.

Yes we will. headers will be here in a week or 2 they are in shipping.

[michaelconklin]

how much are they? and can i run the stock svo t3 on it if i convert it to external waistegate

[94 lngbd]

I have been a member of TRS= TheRangerStation since 11/2007 & I plan to convert my 94 2wd to 4wd using a SAS & I would like to also Turbo my 2.3. Is it a fairly easy bolt on set up that the ranger can use? Does the stock N/A engine need to have anything done to it to be turboed? I have already replaced the 3.45 7.5 with a 4.10 L/S 8.8 rearend. Running 31x10.50/15s,plan to be running 4.56 gears with 33x10.50. Not looking to Drag race,but want the extra power for hauling & towing.

Thanks,Thomas

[speedaddict]

I would like to also Turbo my 2.3. Is it a fairly easy bolt on set up that the ranger can use? Does the stock N/A engine need to have anything done to it to be turboed?

yeah its a bolt on after you get some forged pistons. If you dont want to go into your motor then this is not the swap for you. And you need to get it tuned after the turbo is on there.

There's a bunch of threads on this forum relating to this question.

[jfive]

Headers in stock yet?

[K G]

Headers in stock yet?


Yes just order 1 4/4/10 at 11:30 am
K G

[Finally1]

I just went to the web page says out of stock . I am looking for a Holset style header . If you have one could you send me a pm .

[AJ_Fritz]

ive got 2 of the holset headers made up. i was just on the site didnt see anything about being out of stock. must have just changed it. anyways i'll get the one boxed up and ready to ship as soon as i hear from jess.

[yannijoe201]

i just went to your link for the site. and it said that you were out of stock. how ling til you get some more in?

[phoenixfriend84]

Does the holset header allow me to keep my a/c? I am adding a/c to my xl and desperately need it. The heat index in georgia today was 105 degrees. I was going to to use the one that is pictured on page one. Am I correct that it locates the turbo on top of the header? And would that allow me to keep my a/c?

[marauderx]

I have not had anyone point me to pictures of a turbo ranger with the compressor on the passenger side, I have a '91.

[ben_2_go]

Does the holset header allow me to keep my a/c? I am adding a/c to my xl and desperately need it. The heat index in georgia today was 105 degrees. I was going to to use the one that is pictured on page one. Am I correct that it locates the turbo on top of the header? And would that allow me to keep my a/c?

:hehe: Temp here today was 102 with a heat index of 115. :moon:

:smilielol:smilielol:smilielol

[phoenixfriend84]

That was just in jackson around the lake. In atlanta at the tennis tournament it was 140 on the court. However way off topic sorry guys. Just wondering about that header and my a/c and giving a reason I want to install it I'm way tooo fat to be without it at 6'1" and 230lbs.

[travelor101]

Hmmm, trying to stay as stock as possible but dangit, evrybiody is having so much fun with these after market headers...

[phoenixfriend84]

That's good man. Glad business is going well. Will this header allow me to keep a/c?

[Agent Ezzard]

Any holset manifolds for sale? I'll take one...

[tumuchNOS]

Sooo, do I order from another site and do you take cards? I have a hx35w and would like to keep internal gating, does this header include a block off for the external WG? Will I need the spacer? Does it clear the A/C box on the 84 ranger with a 2.3 originally? Or is there a better header you offer for what I am doing? Time is kind of an issue.

[marauderx]

Got any pics? The links are down...

[Toaster]

Damn, you still selling?

[1988XLT2.9]

Do you have one for a 1988 ranger with a 2.9L v6 for a t3t4?

[RacinGas]

Just about everything here is 2.3L related......

[1988XLT2.9]

thats no fun come on lol

[Spoolinsvt]

Sooooooo, do you still sell he headers?

[travelor101]

I am interested as well, are you still selling these headers?

[Spoolinsvt]

Are you still In business? Website is down and no response................

[splatranger95]

Jess is not selling anymore. He got too busy and is out of the game now.

[Spoolinsvt]

Damn, any one have one I'd his used mainifolds they would like to sell?