PDA

View Full Version : centerforce II pressure plate for the thunderbird TC, 9inch.

AJ_Fritz
10-12-2008, 01:48 PM
will be writing up a review on the 60% over stock clamping power PP as soon as i get it installed.

ive got some big plans for this pressure plate. going for some killer numbers on the dyno. hopefully the 4 puck unsprung hub ceramic clutch will hold up. this is all going into the stang infront of a T-5 transmission.

Jess has got one ordered too so we will se how the 4 puck sprung hub clutch.net disc holds up in his.
Jesshwarren
10-12-2008, 05:51 PM
Kinda funny how we both order at the same time. Mine is back order also. hope it's here for next weekend.
AJ_Fritz
10-12-2008, 09:10 PM
well you ordered yours first lol. i still got to take that one back to autozone.
nagelandy55
10-12-2008, 10:44 PM
Whats the price tag on that PP?
Jesshwarren
10-12-2008, 11:30 PM
Close to 189$ not sure the exact amount.
nagelandy55
10-13-2008, 08:00 AM
Well thats not bad at all
D94R
10-15-2008, 06:45 PM
I'm interested to see how well this combination works for you guys. My eventual plan is a sprung 4puck ceramic disk with the T5 (or T56 if I can find one). Would be nice if these can handle ~500HP at the crank.
Jesshwarren
10-15-2008, 10:59 PM
Would be nice if these can handle ~500HP at the crank.

A stock T/C PP with a 4 puck will hold close to 400RWHP. I would say the centerforce II with the 4 puck will hold close to 600-650 FWHP.
AJ_Fritz
10-16-2008, 01:42 PM
hey matt the tremec TKO will hold 500hp with the t-5 10 spline and the 600hp in the 23 spline. was just looking at that the other day in the summit catalog.

with unlimited funds here is the transmission i would have.
http://www.musclemustangfastfords.com/tech/0406mm_gforce/index.html
D94R
10-16-2008, 05:32 PM
hey matt the tremec TKO will hold 500hp with the t-5 10 spline and the 600hp in the 23 spline. was just looking at that the other day in the summit catalog.

with unlimited funds here is the transmission i would have.
http://www.musclemustangfastfords.com/tech/0406mm_gforce/index.html


I'll re-look at my Summit Catalog again and check them out.

I also now want that Gforce T56!
AJ_Fritz
01-24-2009, 03:42 PM
the centerforce is finally going to get used. my brother is building a 96 ranger 2.3T. its a 4x4 with a 8-10 inch lift. we are going to do all the conversion on it and get everything to jess for a kit build.
nagelandy55
01-24-2009, 05:13 PM
Sweet can't wait to see how it works out for ya.
ri06667
01-24-2009, 07:11 PM
that gforce trans is nice, my catalog just showed up for them today. no prices in it though, i have to admit im curious.