Clutch or Trans?

[BLS2.3]

My '95 2.3/5spd has been acting up lately. It doesn't want to go into any gear. I was thinking sincros but the other day I tried pumping the clutch pedal & it works fine for a short trip (5mi./4-5 stops). This got me thinking its possibly something in the hyd clutch or weak PP springs. My clutch seems to hold fine but engages about 1/2" off the floor. No loss of fluid, 190k, still n/a.

Any thoughts?

[Cutlass327]

Sounds like the clutch is having issues, not releasing properly. Try bleeding it. If there is no leak, and bleeding doesn't do anything, then you may be looking at needing a new clutch master cylinder.

[Hoss]

Sounds like the clutch is having issues, not releasing properly. Try bleeding it. If there is no leak, and bleeding doesn't do anything, then you may be looking at needing a new clutch master cylinder.

:yesnod::yesnod: X2 :yesnod::yesnod:

[oldcarfart]

Clutch master and slave cyls work and wear as a pair, best bet is if one bad or tired the other is also so change as a pair.

[BLS2.3]

Thanks guys,

Picked up a MC today. Hopefully that will work while I get parts together for a clutch upgrade & new slave cyl.