Exhaust (again)

[freebyrd24]

Hey everyone, I'm hoping to revive this post I made regarding exhaust setups. I had asked if anyone had information or pictures on there exhaust setups including cats anddownpipe positioning and such and had a few GREAT replies, but unfortunantly all that was erased by that hacker. (I'll copy and save the info this time for myself) Anyone care to post that again? Thank you

[flyin]

When you install the header and turbo you will realize how much room you have to work with. I installed a 5bolt flange on the turbo. Then I took a 90 degree bend 2.5 inch pipe and cut one end to position the bend so It wouldn't be too close to the firewall and indexed it to clear the starter. Then removed the assembly and welded it. After reinstalling I used another 90 degree to run the pipe to the converter in the stock location using the stock hanger bracket on the trans crossmember. From there 2.5 inch pipe following the stock route with no muffler. My wastegate dumps to separate.